Stub end

Electrofusion flange adaptor is an HDPE flange that gets welded onto the pipe end using electricity. Wires heat up a coil inside the flange, melting the plastic to fuse it permanently to the pipe. The metal ring on the flange then allows bolting to standard metal equipment.

Electrofusion flange adaptor is an HDPE flange that gets welded onto the pipe end using electricity. Wires heat up a coil inside the flange, melting the plastic to fuse it permanently to the pipe. The metal ring on the flange then allows bolting to standard metal equipment.

An electrofusion 90° elbow is a specialized pipe fitting used to connect two sections of high-density polyethylene (HDPE) or other plastic pipes at a 90° angle, allowing for a change in the direction of flow within a pipeline. It employs electrofusion welding, a process where an electric current heats embedded coils within the fitting to melt and fuse the pipe and fitting together, creating a strong, leak-proof joint.

An electrofusion 45° elbow is a specialized pipe fitting used to connect two sections of high-density polyethylene (HDPE) or other plastic pipes at a 45-degree angle, allowing for a change in the direction of flow within a pipeline. It employs electrofusion welding, a process where an electric current heats embedded coils within the fitting to melt and fuse the pipe and fitting together, creating a strong, leak-proof joint.

A flange adaptor is an HDPE fitting fused onto the end of an HDPE pipe, giving that pipe a flat face with bolt holes so it can easily connect to valves, pumps, or steel pipes.