The electrofusion coupler is a short, cylindrical HDPE fitting with embedded heating coils and wire terminals. It is used to join the ends of HDPE pipes together permanently.
Model:FX Coupler
Electrofusion fittings are components used in polyethylene (PE) piping systems connected by electrofusion welding.
Model:End Cap
Electrofusion flange adaptor is an HDPE flange that gets welded onto the pipe end using electricity. Wires heat up a coil inside the flange, melting the plastic to fuse it permanently to the pipe. The metal ring on the flange then allows bolting to standard metal equipment.
Model:FX Flange Adaptor
The electrofusion coupler is a short, cylindrical HDPE fitting with embedded heating coils and wire terminals. It is used to join the ends of HDPE pipes together permanently.
Model:WP Coupler
Electrofusion flange adaptor is an HDPE flange that gets welded onto the pipe end using electricity. Wires heat up a coil inside the flange, melting the plastic to fuse it permanently to the pipe. The metal ring on the flange then allows bolting to standard metal equipment.
Model:WP Flange Adaptor
An electrofusion 90° elbow is a specialized pipe fitting used to connect two sections of high-density polyethylene (HDPE) or other plastic pipes at a 90° angle, allowing for a change in the direction of flow within a pipeline. It employs electrofusion welding, a process where an electric current heats embedded coils within the fitting to melt and fuse the pipe and fitting together, creating a strong, leak-proof joint.
Model:FX 90° Elbow
An electrofusion 45° elbow is a specialized pipe fitting used to connect two sections of high-density polyethylene (HDPE) or other plastic pipes at a 45-degree angle, allowing for a change in the direction of flow within a pipeline. It employs electrofusion welding, a process where an electric current heats embedded coils within the fitting to melt and fuse the pipe and fitting together, creating a strong, leak-proof joint.
Model:FX 45° Elbow